Use of Enttec DMX USB Pro as input device

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
jbrown2000
Posts: 1
Joined: Sun Nov 27, 2011 7:17 am

Use of Enttec DMX USB Pro as input device

Post by jbrown2000 »

I'm trying to configure my Enttec DMX Pro for remote control of Madrix. When I scan under Device Manager/DMX devices, it is recognized, but comes up as an output device under Settings and won't let me change it to an input device. I do have it selected under Devices (USB/PCI) in preferences. And the Enttec box works under other software (LightFactory) so I know the box is good.

Any help greatly appreciated.

Jeff Brown
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: Use of Enttec DMX USB Pro as input device

Post by Wissmann »

Hi,

you are sure you enabled the DMX USB Pro in the Preferences?
Because it sounds like MADRIX does not recognize your interface as a DMX USB Pro, maybe it is about the Open DMX USB and with this MADRIX did not give you the option as a input interface.
LEDs are nothing without control ;-)
Jorgematto
Posts: 1
Joined: Fri Oct 18, 2013 7:07 am

Re: Use of Enttec DMX USB Pro as input device

Post by Jorgematto »

I am having the same issue. It is recognized it sees usbpro but it does not allow me to change it to input. It's sees it in madrix 2 and let's me change.
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: Use of Enttec DMX USB Pro as input device

Post by Wissmann »

Hi Jorgematto,
.
because of continues issues with this kind of interface we decide to disable the input option for this interface in MADRIX 3.
LEDs are nothing without control ;-)
Locked